How To: Linux Show List Of Network Cards

To show a list of network cards in Linux, you can use the ip command. This command allows you to display and manipulate network interface settings.

To show a list of network cards, you can use the following syntax:

$ ip link show

This will display a list of all network cards and their status.

You can also use the ifconfig command to show a list of network cards. This command is used to configure network interfaces and display their status.

To show a list of network cards, you can use the following syntax:

$ ifconfig -a

This will display a list of all network cards and their status.

You can also use the lspci command to show a list of network cards. This command displays information about PCI devices, including network cards.

To show a list of network cards, you can use the following syntax:

$ lspci | grep -i "network"

This will display a list of all PCI devices that contain the string "network" in their description.

You can also use the lsusb command to show a list of USB network cards. This command displays information about USB devices, including USB network cards.

To show a list of USB network cards, you can use the following syntax:

$ lsusb | grep -i "network"

This will display a list of all USB devices that contain the string "network" in their description.

Finally, you can use the ethtool command to show detailed information about network cards. This command allows you to display and modify the settings of Ethernet devices.

To show detailed information about a specific network card, you can use the following syntax:

$ ethtool <interface>

For example, to show detailed information about the eth0 network card, you can use the following command:

$ ethtool eth0

This will display detailed information about the specified network card, including its speed, duplex mode, and link status.