Enable Telnet Access For Netgear Wireless Router DGND3700 [ N600 ]

To enable Telnet access for a Netgear N600 wireless router (model DGND3700), you can follow these steps:

1. Connect to the router's web-based user interface by opening a web browser and entering the router's IP address in the address bar. The default IP address is 192.168.1.1.

2. Enter the router's username and password when prompted. The default username is admin, and the default password is password.

3. From the main menu, select Advanced, then Telnet.

4. Check the box next to Allow Telnet Access to enable Telnet access.

5. Click Apply to save the changes.

After enabling Telnet access, you should be able to connect to the router using a Telnet client, such as the telnet command in a terminal window.

Note: Telnet is an insecure protocol and should only be used for testing or in environments where security is not a concern. It is recommended to use a secure protocol such as SSH for remote access to the router.